Поиск :
Личный кабинет :
Электронный каталог: Zinicovscaia, I. - Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 Toward Indium Ions
Zinicovscaia, I. - Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 Toward Indium Ions
Статья
Автор: Zinicovscaia, I.
Materials [Electronic resource]: Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 Toward Indium Ions
б.г.
ISBN отсутствует
Автор: Zinicovscaia, I.
Materials [Electronic resource]: Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 Toward Indium Ions
б.г.
ISBN отсутствует
На полку
Статья
Zinicovscaia, I.
Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 Toward Indium Ions / I.Zinicovscaia, N.Yushin, D.Grozdov, [a.o.] // Materials [Electronic resource]. – 2023. – Vol.16, No.8. – P.3201. – URL: https://doi.org/10.3390/ma16083201. – Bibliogr.:59.
Indium is an extremely important element for industry that is distributed in the Earth’s crust at very low concentrations. The recovery of indium by silica SBA-15 and titanosilicate ETS-10 was investigated at different pH levels, temperatures, times of contact and indium concentrations. A maximum removal of indium by ETS-10 was achieved at pH 3.0, while by SBA-15 it was within the pH range of 5.0–6.0. By studying kinetics, the applicability of the Elovich model for the description of indium adsorption on silica SBA-15 was shown, while its sorption on titanosilicate ETS-10 fitted well with the pseudo-first-order model. Langmuir and Freundlich adsorption isotherms were used to explain the equanimity of the sorption process. The Langmuir model showed its applicability for the explanation of the equilibrium data obtained for both sorbents, the maximum sorption capacity obtained using the model constituted 366 mg/g for titanosilicate ETS-10 at pH 3.0, temperature 22 °C and contact time 60 min, and 2036 mg/g for silica SBA-15 at pH 6.0, temperature 22 °C and contact time 60 min. Indium recovery was not dependent on the temperature and the sorption process was spontaneous in nature. The interactions between the indium sulfate structure and surfaces of adsorbents were investigated theoretically using the ORCA quantum chemistry program package. The spent SBA-15 and ETS-10 could be easily regenerated by using 0.01 M HCl and reused with up to 6 cycles of adsorption/desorption with a decrease in the removal efficiency between 4% and 10% for SBA-15 and 5% and 10% for ETS-10, respectively.
ОИЯИ = ОИЯИ (JINR)2023
Спец.(статьи,препринты) = С 44 а - Химические методы выделения и идентификации стабильных элементов
Спец.(статьи,препринты) = 28.08 - Экология$
Бюллетени = 1/023
Zinicovscaia, I.
Adsorption Capacity of Silica SBA-15 and Titanosilicate ETS-10 Toward Indium Ions / I.Zinicovscaia, N.Yushin, D.Grozdov, [a.o.] // Materials [Electronic resource]. – 2023. – Vol.16, No.8. – P.3201. – URL: https://doi.org/10.3390/ma16083201. – Bibliogr.:59.
Indium is an extremely important element for industry that is distributed in the Earth’s crust at very low concentrations. The recovery of indium by silica SBA-15 and titanosilicate ETS-10 was investigated at different pH levels, temperatures, times of contact and indium concentrations. A maximum removal of indium by ETS-10 was achieved at pH 3.0, while by SBA-15 it was within the pH range of 5.0–6.0. By studying kinetics, the applicability of the Elovich model for the description of indium adsorption on silica SBA-15 was shown, while its sorption on titanosilicate ETS-10 fitted well with the pseudo-first-order model. Langmuir and Freundlich adsorption isotherms were used to explain the equanimity of the sorption process. The Langmuir model showed its applicability for the explanation of the equilibrium data obtained for both sorbents, the maximum sorption capacity obtained using the model constituted 366 mg/g for titanosilicate ETS-10 at pH 3.0, temperature 22 °C and contact time 60 min, and 2036 mg/g for silica SBA-15 at pH 6.0, temperature 22 °C and contact time 60 min. Indium recovery was not dependent on the temperature and the sorption process was spontaneous in nature. The interactions between the indium sulfate structure and surfaces of adsorbents were investigated theoretically using the ORCA quantum chemistry program package. The spent SBA-15 and ETS-10 could be easily regenerated by using 0.01 M HCl and reused with up to 6 cycles of adsorption/desorption with a decrease in the removal efficiency between 4% and 10% for SBA-15 and 5% and 10% for ETS-10, respectively.
ОИЯИ = ОИЯИ (JINR)2023
Спец.(статьи,препринты) = С 44 а - Химические методы выделения и идентификации стабильных элементов
Спец.(статьи,препринты) = 28.08 - Экология$
Бюллетени = 1/023
Привязано к:
Нет экз.